Scope of application:
1. Metal sheet and profile cutting pieces, stamping parts polishing and deburring.
2. The equipment can also be used for polishing and polishing non-metal plate workpieces such as plastics, nylon, wood and stone.
1. The standard equipment has two sets of interlinked brush disk combined structure. Five brush plates are arranged in a zigzag pattern. The two adjacent brush plates rotate rapidly in the direction of positive and negative direction. The whole combination moves quickly from left to right.
2. The deburring brush is made of dupont wear resistant wire and soft grinding. The deburring does not affect the accuracy of the workpiece, and the roughness and r-angle of the workpiece are controllable. Brush disc can be changed into different mesh steel wire or 100 clean cloth material, to achieve different process requirements.
3. The processing method is through continuous operation, and dry or wet processing machine is selected. Wet vacuum cleaner is recommended for dry machine to reduce environmental pollution and protect the health of operators. Wet machine with paper filter, water or grinding fluid can be recycled, energy saving and environmental protection.
4. The patented structure technology ensures the equipment's super durability, safety and stability, high efficiency, energy-saving, convenient operation and simple maintenance; According to the customer's requirements, we can customize our company's special automatic loading and unloading mechanism, logistics transportation, cleaning, drying and other equipment to form a production line, which can save a lot of manpower and improve productivity.
||The processing thickness
|The equipment can be customized according to the process requirements: two or more sets of grinding heads can be customized; Custom width thickness; Customized dry or wet grinding method; Customized roller positioning or magnetic, vacuum adsorption positioning workpiece mode; Other non - standard specifications. Note: the minimum vacuum adsorption type can adsorb sheet workpieces larger than 2*3cm without jig. Magnetic adsorption is suitable for carbon steel or carbon steel type workpieces. The minimum one mm sheet workpiece can be adsorbed. Note: the combination of customized sand belt and brush plate can remove the large burr and oxide skin of medium and thick plate stamping, shearing parts, and achieve the two processing technologies of wire drawing and burr removal to increase the utilization rate of equipment.